8
Installation Guide
8
tel - 1-800-477-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
EMUBCAMKIT
Universal Quad View Camera Kit
Installation (continued)
Step 3
Positioning The Cameras:
The cameras can be placed anywhere; wheel
wells, frame, bumpers, axle. Facing in any
direction; forward, rearward, sideways.
Note: The cameras come with the mounting
bracket at the top of camera (FIG A). If your
application requires mounting cameras with
the bracket at the bottom of the camera
(FIG B), the mounting bracket will need to
be moved from the top holes in the camera
housing to the bottom holes so the camera
image is not upside-down.
A good idea is to temporarily position the
cameras in the areas you would like to view
(FIG C), route the camera cables to the video
interface, wire up the system and view the
camera views on the monitor. With the help
of another person you can fine-tune the
camera view before permanently mounting the
cameras.
Mounting The Cameras:
The cameras should be mounted in positions
that will not come in contact with terrain or
moving parts of the vehicle. The cameras must
be mounted using both the two-sided
tape and then screws or zip ties. Clean the
mounting area before adhering the camera in
place.
FIG A
FIG B
FIG C
