manualshive.com logo in svg

EchoMaster Pro EMUBCAMKIT, Installation Manual/User Manual

Share
Download
EchoMaster Pro EMUBCAMKIT Installation Manual/User Manual Download Page 18

18

User Guide

18

tel - 1-800-477-2267
email - [email protected]

Illustrations are typical and may not match exact vehicle detail

Settings Menu

Pressing the MENU button on the IR Remote Control will bring up the Settings Menu. Use the arrows to 
navigate the settings icons. Press OK to select highlighted icon. In the setting sub-menu, use the arrows to 
highlight or change desired setting and the then press OK to save and exit.
 

Loop Time

Sets recording time for saved video files.

1 / 2 / 3 Minutes

Display delay

Sets display trigger time when using the 
Display Triggers to activate the source.

2 / 5 / 15 / 30 Seconds

Language

Sets the language displayed.

Chinese(Simplified) / Chinese (Traditional)

English / Korean

Video playback

Allows on-screen viewing of recorded files.

CH1 / CH2 / CH3 / CH4

Normal Video and SOS Video

EMUBCAMKIT 

Universal Quad View Camera Kit

Summary of Contents for EMUBCAMKIT





















Reviews:

No comments

Brands by name

Popular brands

Load more brands