14
Installation Guide
14
tel - 1-800-477-2267
email - [email protected]
Illustrations are typical and may not match exact vehicle detail
EMUBCAMKIT
Universal Quad View Camera Kit
Wiring Guide 2 (cont.)
Step 4
Plug the Video Output Harness
into the video interface.
Step 5
Connect either the CVBS or AHD RCA
to the AV2 IN on the AVS-21. If the radio
does not specifically say Analog High
Definition, use CVBS. Insulate the red
and blue wires when not using.
Step 6
Unplug the rear camera RCA from the
radios camera input and plug it into AV1
IN on the AVS-21.
Step 7
Plug the Yellow AV OUT RCA on the
AVS-21 into the radios rear camera input.
Note
None of white or red RCA’s on the AVS-
21 will be used.
Test
Set DIP switch 5 to the OFF (DOWN)
position. Turn the key on. Power up the
radio. Select the rear camera on the
radio. You should see either the rear
camera or the video interface. See page
15 for setting video output. Use the
Power Switch to switch between the two
4
5
6
7
Insulate these wires
when not using