PRODUCTION
page 30
Buttons under the display
PATT
Press the PATT button to display the currently selected pattern number
used for the effects pattern. Or alternately, to change the currently
selected pattern, key in a new pattern number (1-60) into the display and
press the PATT button.
EDIT
Press SMPTE ENABLE to enable the RS-422 editing interface. The
button will illuminate to indicate that editor commands will be accepted
(if the option is installed.)
RATES
The RATES button is used to display and change the five transition rates
on the panel. If a rate is not currently in the display when the button is
pressed, the rates will be cycled through, starting with fade-to-black,
DSK, autotake, effects key rate, and lastly, the recall panel rate. To
change a rate, use the + and - keys, or simply key in a new rate and press
the RATE button while the rate to be chnaged is in the display.
COMM
To modify a specific command, select the desired command number
using the numeric keypad and press the COMM button. With the desired
command in the display, use the + or - keys to make a selection.
COLORS
When lit, any of the three colorizers can be adjusted with the
SYMM/BORDER/CLIP knobs, or a new color can be entered digitally.
CLEAR
Blanks out the display. Useful when keying in a number and an incorrect
value is entered.
