PRODUCTION
page 21
FILL
SELECT
Press the FILL SELECT button to cycle through:
DskFil Blk Black
DskFil Bgr Background color
DskFil Cam1 Camera 1
DskFil Cam2 Camera 2
DskFil Cam3 Camera 3
DskFil Cam4 Camera 4
DskFil Cam5 Camera 5
DskFil Cam6 Camera 6
DskFil Cam7 Camera 7
DskFil Cam8 Camera 8
DskFil Cam9 Camera 9
DskFil Cam10 Camera 10
DskFil DskF External DSK fill
DskFil Bdr Border color
DskFil Col DSK color
Press ON in the DSK block. With the DSK set to DskCut Cgen and DskFil
Col, change the clip control to bring in a matted CGEN key. Note that the
clip level selected is stored by the computer, so that subsequently each
time this key is selected the clip level will be correct.
DSK
COLOR
To change the color used for the DSK matte fill, press the COLOR button
located beneath the display until the DSK color is displayed. The display
will show saturation, luminance, and hue as:
Dsk ss ll hh
Change the DSK color by adjusting the SYMM/BORDER/CLIP knobs
while the COLOR button is lit and the current DSK color is being
displayed.
The DSK color can be entered digitally, also. With the DSK color in the
display, key in a new six-digit color number, ssllhh, and press COLOR.
Short cuts are available: key in two digits with DSK displayed and press
COLOR to change just the hue (99 49 hh), or four digits to change just sat
and hue (s9 l9 hh).
All colors are limited to NTSC or PAL legal values: if luminance is
adjusted to maximum, saturation will be proportionately limited to zero.
