INSTALLATION
page 17
Options
Several hardware and software options are available for the MVS3. Most options are
detectable by the CPU. A list of currently installed options is displayed by command 4
(press 4 COMM). The only hardware option is the chromakeyer. It is installed by
removing the lower card and inserting the option card. If specified with the initial order,
options will be already installed.
Software options include the rotary wipes, editor interface, and expanded switcher
memory. Software options not installed by the factory can be added in the field. Have
your dealer call ECHOlab with the ID number of your MVS3 and a purchase order
number. Command 24 displays your unique ID number. ECHOlab will then give you a
nine digit number that will install your desired option...key this number into the display
and press COMM. This installation command number is not valid for any other MVS3.
Hardware options
Name:
Description:
RGB-356
RGB chromakeyer
YUV356
YUV chromakeyer
EXT-356
MVS extender board
XCODE-356
RGB transcoder on inputs 9 and/or 10 (component systems only)
TRB-356
Tally relay box
Software options
SMPTE-356
SMPTE Serial Interface to Editors (GVG-100 protocol)
MEX-356
Memory expansion (takes panel setups from 9 to 99)
RWP-356
Rotary wipes (adds patterns 49-60)
POP-356
Programmable output option for PROG2
SHIFT-3
Shifted input option (adds access to inputs 7-10)
