PRODUCTION
page 20
DSK
The downstream keyer can be used to fade the output picture to black, or to add titles.
Press BLACK to fade the to and from black. Press DSK to fade the downstream key.
KEY
SELECT
To add a key to the program picture with the DSK, first select an active
key signal using the KEY SELECT button. As this button is pressed, the
display will cycle through the inputs:
DskCut Key1 :1
Key 1
DskCut Key2 :2
Key 2
DskCut Key3 :3
Key 3
DskCut Key4 :4
Key 4
DskCut Key5 :5
Key 5
DskCut Cgen :6
Cgen
DskCut Ckey :7
Chromakeyer
DskCut Insrt
:8
Insert bus
Note that if the cut select choice is not in the display, the first push of the
cut select button will display the current source without changing it. The
second push will then cycle ahead.
To access a cut source directly without cycling through all choices, key the
number after the colon into the display and press the KEY SELECT button
once. This same procedure works for all other select functions. Adjust the
CLIP control to make the key size correct. Command 12 will reverse the
key. Command 37 will adjust the key softness. Key gain can be adjusted
digitally from 0 to 127 using command xx.
