PRODUCTION
page 26
Patterns
The pattern controls specify the shape and position of wipe patterns and the border color
and width. The SYMM and BORDER knob are also use along with the CLIP knob in the
effects section to adjust colorizers when the COLORS button is illuminated.
BORDER
COLOR
To change the color used for borders, press the COLOR button in the
Pattern group until the BORDER color is displayed. The display will
show saturation, luminance, and hue as:
Bdr ss ll hh
Change the border color by holding down the COLOR button with BDR
displayed and adjusting the three SYMM/BORDER/CLIP knobs in the
Pattern and Effects section.
DIGITAL
COLOR
The border color can be entered digitally, also. With BDR in the display,
key in a new six-digit color number, ssllhh, and press COLORS. Short
cuts are available: key in two digits with BDR displayed and press
COLORS to change just the hue (99 49 hh), or four digits for a coarse
specification (s9 l9 hh).
An example of pattern selection:
