Echo PAS Series Safety Manual Download Page 8

Page: 8 / 52

ENGLISH

PHYSICAL CONDITION

WARNING

Operating this unit while you are impaired can

result in serious personal injury or death to your-

self and others. Never operate the unit if you are

fatigued, or are under the influence of alcohol,

medication, or any other substances that can

affect your judgment, reflexes, vision, or coordi

nation. You must be mentally alert and physically

able to operate a trimmer, brushcutter, edger, or

PAS attachment safely. If you are impaired in any

way, or are physically unable to safely operate

and control the unit, do not fuel, start, or attempt

to use the unit.

PERSONAL PROTECTIVE EQUIPMENT

WARNING

Operating a trimmer, brushcutter, or other powered

cutting or work attachment may expose you to sharp

blades, powerful cutting action, spinning nylon cut-

ting line, flying debris, and other work area hazards.

These hazards can cause serious injury to you and

others if you do not take the precautions necessary

for safe operation.

To help protect against risk of injury caused by these

hazards, you must wear appropriate personal protec-

tive equipment:

Eye and Face Protection

Wear eye protection that meets current ANSI Z87.1

requirements. For additional safety, a full-face shield may

be worn over safety glasses or goggles to provide protection

from sharp branches or flying debris.

OPERATOR SAFETY

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands