Echo PAS Series Safety Manual Download Page 27

Page: 27 / 52

ENGLISH

Stop unit immediately if

sudden vibration occurs

• ALWAYS

use extra care to maintain footing

around sloping, hilly, or slippery ground, and

around uneven surfaces like steps, raised

walkways, edging, and curbs.

• ALWAYS

hold the unit firmly with two hands,

with thumbs wrapped around the handles for

a secure, comfortable grip. Left/front handle

in left hand and right/rear handle in right

hand.

• ALWAYS

cut using a stable stance, with both

feet on the ground.

• NEVER

stand on a ladder or other temporary

platform. You can fall or slip, and injure

yourself or others.

• NEVER

allow others near the cutting/work

area, or to hold material you are cutting.

• ALWAYS

keep both hands on the unit to

maintain control.

• ALWAYS

keep the muffler exhaust directed

away from your body.

• NEVER

touch the muffler, muffler cover, or

surrounding area. Allow the unit to cool down

before performing any maintenance in the

muffler area.

• NEVER

allow flammable debris such as dried

leaves and sticks to build up in the exhaust area. Heat from operation can

ignite these materials, and cause fire.

• ALWAYS

keep fingers, hands, and all other body parts away from the

cutting/work attachment and cutting/work area.

• NEVER

allow anyone to reach into the cutting/work area for any reason

while the unit is running.

• ALWAYS

maintain a direct line of sight to the cutting/work attachment and

the area where cutting/work is being performed. Be aware of what lies in

the path of the cutting/work attachment at all times.

• NEVER

work in the dark or when visibility of the work area is poor.

• ALWAYS

be alert for changes in operation that could signal a problem -

sudden vibration, unusual noise, the strong smell of fuel, or poor engine

performance, all require immediate attention. Stop the unit and correct any

problems before resuming cutting.

• NEVER

carry unit around the work site while the blade or attachment is

rotating.

• ALWAYS

shut the engine off and let the blade or attachment stop before

lifting the unit and moving to a new position.

Always use 2 hands

to hold unit

OPERATION

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands