Echo PAS Series Safety Manual Download Page 5

Page: 5 / 52

ENGLISH

Slip Hazard Alert

Wear slip-resistant footwear to reduce risk of falls.

Finger Sever Hazard

Moving parts can amputate fingers or cause severe

injuries. Keep hands, clothing and loose objects away

from all openings.

Prohibited Clothing

Wear protective clothing and shoes. Loose clothing, dangling

accessories, or open footwear increases risk of serious injury.

Stop Symbol

Indicates the “Stop” position for the engine ignition switch

(Stop Switch).

Keep Bystanders 15m (50 feet) Feet Away

Keep bystanders at least 15m (50 feet) away when

operating unit.

Do Not Operate Near Electrical Lines

Do not operate closer than 15m (50 feet) to electrical lines.

Flame Prohibition

Do not allow flames or sparks near fuel or fuel vapors.

No Smoking Prohibition

Do not smoke near fuel.

STOP

15m

(50 feet)

15m

(50 feet)

SAFETY SYMBOLS AND WARNINGS

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands