Echo PAS Series Safety Manual Download Page 48

Page: 48 / 52

ENGLISH

Grass/Weed

Blade

A blade used to cut soft, light vegetation, such as grass

and weeds. Not for use in clearing brush, saplings, or

small trees.

Grass Trimmer (Curved Shaft). GT models cannot use a

metal blade.

Harness

An adjustable shoulder strap used to support a trimmer

or brushcutter. Helps operator control unit by providing

a stable support and reducing fatigue. Required for all

Brushcutter applications.

Head

Protection

Helmet-like device that protects the head from falling

materials.

Hearing

Protection

Devices

Protective devices such as ear plugs orear muffs that

protect hearing by reducing exposure to harmful noises.

Hedge Clipper A cutting device with reciprocating blades. Used to cut

hedges, shrubs, and ornamental vegetation.

Idle Speed

The normal running speed of the engine when the throttle

trigger is not depressed.

Kickout

The sudden and forceful action that occurs when a blade

propels itself out of a cut due to binding or pinching of the

blade.

Manual Line

Head

A line head that requires manual indexing of cutting line.

Maxi-Cut

Blade

A cutting head with 3 straight blades that can be used

in place of a nylon line head. When the blade rotates,

centrifugal force causes the blades to fully extend, creating

a wide cutting swath.

Maximum

Diameter Cut

The largest diameter material that can be cut by the cutting

attachment.

Muffler

Housing

Provides protective barrier around muffler. Helps prevent

accidental contact with muffler when unit is hot.

PAS

Power Attachment Series - System consisting of an engine

power source, drive shaft, and a variety of optional work

attachments that can be changed as needed.

Power Head

Engine assembly - includes engine, clutch, fuel system,

ignition system, air filter, and recoil starter.

Protective

Clothing

Clothing that provides protection from work place hazards

that can cause cuts, scratches, or contact injuries.

Pruner

A cutting device used to cut small limbs and branches from

trees, bushes, and shrubs.

Purge Bulb

Draws fuel mix from gas tank to carburetor. Helps engine

to start by removing air from fuel line.

Push and Pull

Reactive forces that push the unit toward the operator, or

that pull the unit away from the operator.

GLOSSARY

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands