Echo PAS Series Safety Manual Download Page 6

Page: 6 / 52

ENGLISH

Do Not Operate Equipment While Impaired

Do not operate equipment while under the influence of

alcohol, medication, or any other substance that can impair

judgment, reflexes, vision, or coordination. Operating a unit

while impaired can result in serious injury to operator and

bystanders, or cause damage to property or equipment.

Flying Debris Hazard

Work attachments can throw debris. Flying debris can

cause serious injury.

Danger Zone Alert

Maintain 15 m (50 feet) radius danger zone

around trimmer - brushcutter.

Metal Blade Prohibition

(Use Nylon Line Head Only)

Metal blades cannot be used on unit. Use nylon

line head only.

Edger Debris Alert

Edger debris can affect stable footing. Use extreme

care when walking in edging area.

Edger Blade Alert

Edger Blade is partially exposed during operation. Keep clear

of blade.

Operate Only With Debris Shield In Place

Do not operate without correct debris shield.

15m(50ft)

SAFETY SYMBOLS AND WARNINGS

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands