Echo PAS Series Safety Manual Download Page 4

Page: 4 / 52

ENGLISH

Read Operator's and Safety Manuals

Read manuals carefully, and follow rules for safe operation.

Failure to do so could result in serious or fatal injury.

Wear Head, Eye, and Hearing Protection

Wear head, hearing, and eye protection that meet ANSI

requirements.

Wear Hand Protection

Wear heavy duty work gloves to protect hands

Sharp Blades Alert

Contact with blades can result in serious cuts and amputation

Carbon Monoxide Hazard Alert

Do not operate indoors. Breathing carbon monoxide can

cause serious or fatal injuries.

Explosion Hazard Alert

Gasoline vapor can explode if exposed to sparks or open

flame.

Burn Hazard Alert

Contact with hot surfaces can cause serious burns.

Fire Hazard Alert

Risk of fire from gasoline spills or leaks. Wipe up spills

immediately and dispose of wipes in an approved fire-safe

container.

Shock Hazard Alert

Unit not insulated against electrical current. Avoid power lines.

SAFETY SYMBOLS AND WARNINGS

Summary of Contents for PAS Series





















































Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands

Echo PAS Series, Safety Manual

Search results

Summary of Contents for PAS Series

Reviews:

Related manuals for PAS Series

Brands by name

Popular brands