55
C.3 Environment Conditions
Transportation
Temperature
-20
℃～
+55
℃
Relative humidity
≤93%
Atmospheric pressure
50 kPa
～
106 kPa
Storage
Temperature
-20
℃～
+55
℃
Relative humidity
≤93%
Atmospheric pressure
50 kPa
～
106 kPa
Operation
Temperature
+5℃～+4O℃
Relative humidity
≤80%
Atmospheric pressure
86 khPa
～
106 kP
Appendix D EMC Information
Instructions for use
The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments and so on.
Warning
：
Don’t near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance
imaging, where the intensity of EM disturbances is high.
Warning
：
Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result
in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify
that they are operating normally.
Warning:
Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation.”
Warning
：
Portable RF communications equipment (including peripherals such as antenna cables and external antennas)
should be used no closer than 30 cm (12 inches) to any part of the equipment (detail model name), including cables
specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
If any
：
a list of all cables and maximum lengths of cables (if applicable), transducers and other
ACCESSORIES that are replaceable by the RESPONSIBLE ORGANIZATION and that are likely to affect
compliance
of
the
ME EQUIPMENT
or
ME SYSTEM
with
the
requirements
of
Clause
7
(EMISSIONS) and Clause 8 (IMMUNITY). ACCESSORIES may be specified either generically (e.g.
shielded cable, load impedance) or specifically (e.g. by MANUFACTURER and EQUIPMENT OR TYPE
REFERENCE).
If any
：
the performance of the ME EQUIPMENT or ME SYSTEM that was determined to be ESSENTIAL
PERFORMANCE
and a description of what the OPERATOR can expect if the ESSENTIAL
PERFORMANCE
is
lost
or
degraded
due
to
EM
DISTURBANCES
(the
defined
term
“ESSENTIAL PERFORMANCE” need not be used).
