English
English
17
STARTING THE WASH PROGRAM
Table of wash programs
Programme
Information for program
selection
Program
description
Detergent
Pre-wash/wash
Program
length
(min.)
Energy
consump-
tion
(kWh)
Water con-
sumption
(l)
Intensive
For heavily soiled pots and
pans and dishes with dried
food remains.
Pre-wash
Wash (60°C)
Rinse 1
Rinse 2
Hot rinse
Drying
4/20 g
(or 3in1)
213
1.68
15.3
Eco
(*EN 60436)
(standard
program)
For normally soiled loads,
such as pots, plates, glasses
and lightly dirty pans.
Standard daily cycle.
Pre-wash
Wash (48°C)
Rinse
Hot rinse
Drying
4/20 g
(or 3in1)
239
0.848
10
Light
Light washing program
is suitable for delicate
dishes, sensitive to high
temperatures. (Start
immediately after using the
dishes)
Pre-wash
Wash (45°C)
Rinse
Hot rinse
Drying
3/16 g
(or 3in1)
152
0.95
13
60 min
Lightly and normally soiled
glasses, plates or bowls,
everyday washing.
Hot rinse 1
Hot rinse 2
Hot rinse (50 °C)
Drying
3/16 g
60
1.05
9.6
Fast
Quick programme for lightly
soiled dishes that do not
need to be dried.
Wash (45°C)
Hot rinse
3/16 g
40
0.6
6.6
Rinse
To rinse dishes, which you
want to wash later.
Pre-wash
–
12
0.01
3.9
Values for programmes other than ECO are indicative.
1
The ECO programme is suitable to clean normally soiled tableware, it is the most efficient program in terms
of its combined energy and water consumption. This programme is used to assess compliance with EU eco-
design legislation.
2
Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not
recommended.
3
Washing tableware in a household dishwasher usually consumes less energy and water than hand
dish washing when the household dishwasher is used according to this instruction manual. Filling the
household dishwasher up to the capacity indicated by the manufacturer will help to save energy and water.
Information for comparative test in accordance with EN 60436 is as follows:
•
Capacity: 14 sets for 60 cm dishwashers
•
Upper basket position: Bottom position
•
Setting of rinse-aid dispenser: 6 (or 4 for dispenser with four positions)
Switching on the appliance
Starting the wash program
1. Fill both baskets with dishes and load them back.
We recommend that you fill first the lower basket and then the upper one.
2. Add the detergent (see chapters on dosage).
3. Connect the power cord to a suitable power outlet, see rating plate of the appliance. Check, if the water
supply is fully open.