English
English
17
FM Setup
FM area
Select an Area based on your physical location and define the seek range.
Scan settings
Either All stations or Strong stations only (with stronger signal) can be selected for scanning.
Audio settings
You can set Auto Stereo or Forced Monofor playback.
FM full scan
By selecting this option you can always perform a new FM channel scan. All current presets and channels will
be deleted.
The station with the lowest found frequency will be highlighted. The preferences list will be saved until a new
scan is performed.
FM station list
You can adjust the order of the presets using the Move Down, Move Up or Delete buttons. Highlight one of
the presets and press the
B
button to enter the Edit menu. You can always return to the preset list by pressing
the
b
button.
Local radio
By default, the radio is set to automatically detect radio stations in your area via your internet connection and
make these stations available by pressing the Local button on the remote control. You can also set a different
region if you wish. Highlight Local radio and press OK. To change the region settings, select Manual-set local
radio.
Playback setup
Used to set the playback mode for UPnP/DLNA compatible streaming: Repeat All, Repeat One, Shuffle and
Normal.
Resume play options
Set whether to return the device to the last operating mode or display the home screen after switching on.
Power-on options
This is used to select the state of the radio after a reset or power interruption – whether to return to standby
mode or to the state selected from Power-on options.
Automatic energy saver
Set a time limit after which the radio will automatically go into standby mode when not in use.
Dimmer
You can adjust the display backlight level to your liking. Two settings are available: Mode and level
Mode - Normal or Dim
•
Normal: The display remains at the same brightness level at all times without dimming.
•
Dim: the display will dim after 20 seconds of no interaction with the radio.
Level
•
Brightness: Used to adjust the brightness level in Normal mode.
•
DIM: Used to adjust the brightness level in Dim mode.
