English
English
12
Shop
Use this option to add new apps from the app market. Highlight and press
OK
. The available apps will be
displayed. You can also access the App Market from the More Apps menu.
Settings for the disabled
This option takes you directly to the access settings menu.
Privacy settings
This option takes you directly to the privacy settings menu. This feature may not be available in the First
Installation process depending on the TV model and country selected.
Settings
Use the options in this menu to control your TV. For more information, see
Settings menu contents
.
Use the
Reset App
option to adjust your
My TV
customisation to the default values (availability depends on
your TV model and features). Highlight and press
OK
. A confirmation dialog message appears. Highlight Yes
and press
OK
to continue. Please note that you will not be able to perform this operation again within the next
few minutes.
Sources
You can manage input source preferences using the options on this menu. To change an existing source,
highlight the one you wish to use and confirm
OK
.
Settings Resources
This option takes you directly to the source settings menu. Here you can change names, enable or disable
selected resources.
Inserting battery in the remote control
The battery compartment cover can be secured against accidental opening. To unlock, insert a blunt, pointed
object (e.g. a paper clip) into the hole above the cover and push it in. At the same time, slide the cover in the
direction indicated by the arrow. Insert two 1.5 V AAA batteries. Make sure the (+) and (-) markings match
(make sure the polarity is correct). Do not mix old and new batteries. Replace only with the same or equivalent
type. Put the cover back on and secure it again with the screw.
A message will appear on the display if the batteries are almost dead and need to be replaced. Note that if the
battery level is low, the performance of the remote control may be impaired.
Batteries must not be exposed to excessive heat, such as sunlight, fire, etc.
TV CONNECTION
Plugging into power
IMPORTANT:
The TV is designed for use with 220-240 V AC at 50 Hz.
After unpacking, allow the TV to reach room temperature before
plugging it in.
Plug one end (two-hole plug) of the supplied detachable power
cord into the power cord socket on the back of the TV as shown
above. Then plug the other end of the power cord into a power
outlet.
Note:
The position of the power cable input may vary depending
on the model. The position of the switch may vary depending
on the model.
Antenna connection
Connect the antenna or cable TV plug to the ANTENNA INPUT (ANT) jack or connect the satellite to the
SATELLITE INPUT (LNB) jack on the front side of the TV.
