39
4.5.3 Pre
Alarm
y
Please (
) RECORD>Pre Alarm and the following will appear.
y
Pre Alarm is effectively used when you selected recording mode by Alarm or Motion.
y
The Pre Alarm will allow you to check, during playback, the previously recorded video before the record start time.
y
Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. You cannot change camera titles
here.
y
Click (
) each frame on Resolution column to select recording resolution of a corresponding camera. You may select one of
720x480, 720x240 and 360x240
.
y
Click (
) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
Network Setting
Dual Streaming Disabled
Dual Streaming Enabled
NTSC(PAL)
360x240 720x240
720x480
360x240
720x240 720x480
4 Channel DVR
120(100) 120(100)
60(50) 120(100)
120(100) 60(50)
8 Channel DVR
240(200) 120(100)
60(50) 240(200)
120(100) 60(50)
16 Channel DVR
480(400) 240(200)
120(100)
240(200)
120(100) 60(50)
y
Click (
) each frame on Quality column to select recording quality of a corresponding camera. You may select one of
Super, High and Std
.
y
Click (
) each frame on Duration column to select recording duration (i.e.,
1 second ~ 3 hours
) of a corresponding camera.
y
Choose ‘OK’ to confirm the setting.
4.5.4 Motion
Detection
y
Please click (
) RECORD>Motion Detection and the following screen will appear.
y
The Motion Detection menu will allow you to set Motion detection alarm.
y
Press
SETUP
key (or right mouse button) and the SETUP menu will appear.
y
SETUP menu descriptions.
(NOTE)
Holiday (H) registration is done with a separate menu.
