Support:
Support.Eccotemp.com
Shop Online:
Eccotemp.com
Store Locator:
Eccotemp.com/locator
6
ENGLISH
PLEASE NOTE: MINI TANKS ARE FOR INDOOR PERMANENT INSTALLATIONS ONLY.
BEFORE POWERING THE WATER HEATER, BE SURE THAT THE SYSTEM IS COMPLETELY FILLED WITH WATER
AND ALL AIR IS REMOVED.
THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE. PLEASE VISIT SUPPORT.ECCOTEMP.COM FOR MORE INFORMATION.
General Information
The Eccotemp
SMART
HOME Mini Tank Water
Heater can be used in most boats, campers,
tiny homes, RV’s, homes, under the sink, offices,
cottages, kitchens, utility rooms, apartments, and
food trucks. Eccotemp
SMART
HOME Mini Tank
models are designed to supply hot water for
all hand wash and kitchen sinks in a residential
environment.
Eccotemp
SMART
HOME Mini Tank models can
replace traditional central water heaters, thereby
conserving water and reducing energy waste.
The Eccotemp
SMART
HOME Mini Tank
Water Heaters are lightweight, compact, and
manufactured for easy installation. Eccotemp
SMART
HOME Mini Tank models can be mounted on the wall with included hardware,
or they can be placed freestanding.
Eccotemp
SMART
HOME Mini Tank models are designed to operate at 150-psi
maximum water pressure. Install a pressure-reducing valve if your water pressure is
greater than 150-psi.
Eccotemp
SMART
HOME Mini Tank Water Heaters also come with an app for your
mobile device that can be downloaded from the Apple App Store and the Google Play
Store. Search for “Eccotemp” to easily find the app, download it, install it, and begin
using the app to complete your setup. Once you have the app set up, you can use it
to adjust the temperature through your smart phone, or
SMART
HOME devices, to
increase the energy efficiency of your home.
CAUTION! The manufacturer cannot be responsible for the damage caused by
improper installation or by failure to follow instructions in this manual. Comply
with the Installation Instructions before connecting to electrical outlet.
CAUTION! The thermostat has been pre-set at the factory to 125°F (51.7°C) or
lower to reduce the risk of scalding injuries.
WARNING! Installer should review the contents of this manual with the owner
upon completion of the installation, and the manual should remain with the
owner and placed in a location close to the water heater.
THE FUTURE OF EFFICIENCY
GENERAL