Page 2 of 6
P/N 920-0647-00 (Rev C) 2018-12-03
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
Caution:
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines, vehicle upholstery,
vehicle support members, etc. that could be damaged.
!
Specifications:
Installation & Mounting:
Mounting
Before proceeding with installation, plan all wiring and cable routing. Select the mounting location for the lightbar on a flat, smooth
surface and center the unit across the width of the vehicle. The mounting location for the lightbar should be chosen such that the
lightbar is level and visibility to approaching traffic is optimized.
Specifications:
Length
770mm (30”)
1000mm (39”)
1250mm (49”) 1500mm (59”)
Height
85mm (3.3”)
Width:
200mm (7.9”)
Voltage
12-24VDC
Current Draw
Single LED ( Class I ) =
Single LED ( Class II ) =
Double LED ( Class I ) =
Double LED ( Class II ) =
0.30A Avg. @ 12VDC
0.80A Avg. @ 12VDC
0.40A Avg. @ 12VDC
1.20A Avg. @ 12VDC
Per Module
Flash Patterns
10 (See chart)
Available Flash Pattern Chart
Sequence
Description
FPM
Class I
Class II
(Available upon
request)
1
Steady Burn
N/A
N/A
N/A
2
Single (All On)
123 FPM
3
Double (All On)
123 FPM
4
Triple (All On)
123 FPM
5
Quad (All On)
123 FPM
6
Single (Alt L/R)
123 FPM
7
Double (Alt L/R)
123 FPM
8
Triple (Alt L/R)
123 FPM
9
Quad (Alt L/R)
123 FPM
10
ICAO / CAP168 Airport
60 FPM
N/A
N/A
Notes: Flash pattern 10 (ICAO) Is only available on ICAO requested lightbars.
ECCO Catalogue Variants supplied with Class I Flash Patterns.
EZ0006 Controller available for bars fitted with control cable only.
