PX200NB
–
Manual
Page 50 / 57
b)
Click “Config.” option and then select “Set Configuration” function to display
lit of parameters.
c)
Enter server address, server port and APN. Click OK and system shall send
to device provided parameters (SMS).
d)
Wait till device addresses server (in “Devices” tab it wi
ll be marked with
green colour).
e)
Launch software and define options of device (description is provided in
chapter 7 of this Manual).
f)
Select “Send” to display a new window and select remote connection (GPRS
tab). Save settings in memory of device. Saving course is displayed on
special window.
g)
After saving completion close configuration wizard.
h)
The device is ready to transmit data.
10.1.2.
Reprogramming of device
As the device has defined access parameters in respect of GPRS network and
OSM.Server, it is possible to program device at any time.
If device is installed in secured object and is furnished with SIM card and
connected to power supply follow the procedure:
a)
Launch configuration wizard and define options of device (description is
provided in chapter 7 of this Manual).
b)
Select “Send” to display a new window and select remote connection (GPRS
tab). Save settings in memory of device. Saving course is displayed in
special window.
c)
After saving completion close configuration wizard.
d)
The device is ready to transmit data according to new settings.
