PX200NB
–
Manual
Page 19 / 57
6.5.5.
Read configuration
This function reads the information stored in the device memory. Depending on the
defined connection type you will be able to read the history remotely via
LTE/HSPA+, and locally using Bluetooth (SP-PROG-BT, MINI-PROG-BT) and an
RS232 (SP-PROG,GD-PROG) after switching the communicator into the
programming mode (only MINI-PROG-BT
automatically switches to programming
mode)
. By clicking “Read configuration” button, you can start downloading the
settings saved in the communicator’s memory, with a message bar containing
successful/failed reading shown at the bottom of the app. Data downloaded from the
device can be stored and used later for other devices.
6.5.6.
Write configuration
This function is similar to the above, but it allows you to send settings and
configuration to the device memory (select Settings and system config”
option). You
can also set the date and internal clock for the device (use field “Device time and
date”). By clicking “Send” button, you can start sending the defined data, with a
message bar containing successful/failed sending information shown at the bottom
of the app.
