
EBS-230
Printer User's Manual
20080512#1.0
_____________________________________________________
57
4.3.8.
Prints are crooked, wavy and jagged
PROBLEM REMEDY
The prints are crooked,
wavy and jagged.
´
The printer holder is fixed to the base that is subject to strong
vibration and shocks. The printer shakes during the printing. Fix
the printer holder to a stable structure that is not subject to
vibration or shocks.
´
Objects moving on the conveyor are subject to strong vibration
or shocks. Adjust the movement of objects in front of the printer
so that they do not vibrate or are not subject to shocks while
being labelled.
Fig. 4.3.8.1.
4.3.9.
Removing the Housing (Cover) from the Printer
In order to remove the cover from the printer, follow the below specified steps:
a). Stop printing with the
PRINT ON/OFF
key and switch off the printer with the
R230
distributor
power switch.
b). Switch the printer off.
c). Remove the printer from the printer holder and uninstall the distance holder.
d). Unscrew two nuts off the bolts at the back of the printer and remove the washers.
e). Holding the printer cover, press the front part of the printer with your thumb into the inside, until
the cover starts slipping off freely.
f). Slip the cover off the printer so that the guide bars slip out of the tubes.
distance holder
retaining nuts
press the front
of the head here
printer without
the cover
Fig. 4.3.9.1
4.4. How to Contact your Service Representative
The above paragraphs provide instructions on how to remove some faults of the printer. The faults
can be corrected by the user without the need to call a service representative. In certain
circumstances, however, an intervention by a service representative is not only desirable but
necessary. Therefore before you call your service representative, collect some information to help the
service staff to pre-locate the fault. With this information your service representative can agree upon
Summary of Contents for EBS-230
Page 1: ...EBS 230 USER S MANUAL...
Page 2: ......