
EBS-230
Printer User's Manual
48
___________________________________________________
20080512#1.0
4.
Servicing the Printer
4.1. Routine
Maintenance
Before starting maintenance, get acquainted with section
Safety and Installation Requirements
User-performed maintenance consists in, amongst other things, periodic inspections and service
operations to keep the machine in good working order. Some operations need to be performed daily
while others every specified period of time.
Daily maintenance:
´
Check the level of ink in the bottle. If the bottle is empty, replace it - see section
New Bottle of Ink (or Replacing the Empty One)
´
It is recommended that each time the printer is switched off, the front part of the print head,
especially the nozzles and photo-detector are washed in order to remove any remaining ink. Use
a sprayer with cleaning fluid (wash-up).
Routine maintenance:
´
Every 1000 hours
of operation – check that the ink filter on the bottle is clean.
´
Every 12 months
of operation – check the transmissibility of the ink filter on the bottle and the
printer's air filter.
´
If the printer is not to be used for a longer time (over 2 weeks), secure the printer as described in
section
NOTE!
)
The use of sharp tools or improper fluid (
wash-up
) to clean and wash the print head
may result in damage which is not covered by the warranty!
!
)
While washing the panel and connections with wash-up, cover the air inlet (AIR
IN). The failure to make sure that the air inlet is covered may result in damage to
electronic circuitry inside the print head.
)
Ink and cleaning fluid (
wash-up
) can only be used, if supplied by the printer
Manufacturer!
)
Different ink types must not be mixed!
!
IF THE ABOVE REQUIREMENTS ARE NOT MET, THE MANUFACTURER SHALL BE
RELEASED FROM ITS WARRANTY OBLIGATIONS.
Summary of Contents for EBS-230
Page 1: ...EBS 230 USER S MANUAL...
Page 2: ......