EBS EBS-230, User Manual, Page: 24 / 64

EBS-230
Printer User's Manual
22
___________________________________________________
20080512#1.0
Fig. 3.3.5.3.
A font-change marker is stored in the text as a non-printing code and it increases the length of the text
by one. In order to delete a marker, place the cursor in front of it and press the
Delete
key or
alternatively place the cursor behind it and press the
BackSpace
key - see the indicator of the cursor
position within the text. If a font-change marker is deleted, then characters following the deleted
marker have the same attributes as the text in front of the deleted marker had.
NOTE: To change the font to a font with more vertical pixels (amount of dots) you need to adjust
(increase) the setting of the
Number of nozzles parameter.
!
Using and Changing Windows® Fonts
You can also use Windows® fonts to create texts in your printer.
1. Move to the
Font list and replace build-in font with one of fonts installed in your Windows®. You
can change the font Size and the keyboard "language" in Windows®. While increasing the text
height do not exceed H
max
[pix] line because otherwise the excessive top part of the text will be
cut off.
other parameters of Windows
®
fonts
change the
font size
change the font
the line indicating
the maximum print height
H
max
[pix]
character insertion mode
for Windows® fonts
excessive-font-size indicator
change Windows
®
keyboard language
if you use Windows
®
fonts type in
characters in this widow Fig. 3.3.5.4.
2. Move the cursor to the position where you want to start a text and type in the text. You can
change the font at any time.
3. There are three character insertion modes you can use:
Single character, mode 1 , Single character, mode 2 , Multi character . Each of them matches
Windows® font characters with the capabilities of your printer in a different way according to the
font type, language and character insertion mode (the
Right to left editing parameter).