
EBS-230
Printer User's Manual
20080512#1.0
_____________________________________________________
17
3.
Operating the Printer
3.1. Operation
Panel
LED indicating
whether the printer is
power-supplied
properly and what the
validation status of a
new bottle of ink is
LED indicating
the print status
Printer on/off
and rinse button
LED indicating print-parameter
or other errors in the printer
LED display showing text
number prepared for printing
text number
selection keys
Fig. 3.1.1.
Elements of printer panel.
The operation of the
PRINT ON/OFF
button:
•
When the button is pressed shortly, the printer is triggered between the
stop
state and
state. The
state is indicated by light emitted by the
lamp. With use of the controller
program you can configure the finishing of the printing assignment by pressing the
ON/OFF
– see chapter
•
When the button is pressed and held down for some time, the rinsing of the print head of the
printer starts. All nozzles open at the same time in order to increase the flow rate. The function of
rinsing is used to remove obstacles, if any, from slightly choked nozzles or to rinse the print head
with wash-up.
!
If the
ERROR
lamp lights up after the
PRINT ON/OFF
button has been pressed, this is an indication
that print parameters stored in the printer memory are incorrect and cannot be used to print a text. In
order to clear the error, load all print parameters and a text to be printed to the printer memory from
the computer with the use of
EBS-230
printer control program or with the
T200
terminal.
Summary of Contents for EBS-230
Page 1: ...EBS 230 USER S MANUAL...
Page 2: ......