CALIFORNIA EVAPORATIVE EMISSION CONTROL
All new 2014 EBR motorcycles sold in the state of California
are equipped with an evaporative emission control system.
This system is designed to meet the CARB regulations in
effect at the time of manufacture. The system requires a
small amount of maintenance. Periodic inspection is required
to make sure hoses are properly routed, not kinked or
blocked, and that all fittings are secure. Mounting hardware
should also be checked periodically for tightness.
EPA NOISE REGULATIONS IN THE UNITED
STATES
EPA Noise regulations require that the following statements
be included in the Owner’s Manual.
TAMPERING WITH NOISE CONTROL SYSTEM
PROHIBITED
Federal law prohibits the following acts of the causing thereof.
(1.) The removal or rendering inoperative by any person
other than for the purposes of maintenance, repair, or
replacement of any device or element of design incorporated
into any new vehicle for the purpose of noise control prior to
its sale or delivery to the ultimate purchaser or while it is in
use, or (2) the use of the vehicle after such device or element
of design has been removed or rendered inoperative by any
person.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE
TAMPERING ARE THE ACTS LISTED BELOW.
1.
Replacing the muffler(s) and/or entire exhaust
system with parts not certified to be noise legal for street use.
2.
Removing or modifying the muffler internal baffles in
any way.
3.
Replacing the air intake/cleaner assembly with one
not certified to be noise legal for street use.
4.
Modifying the air intake/cleaner assembly in such a
way as to make the vehicle no longer noise legal for street
use.
EBR recommends that any and all noise related maintenance
be done by an authorized EBR dealer using genuine EBR
parts.
WARRANTY AND SERVICE INFORMATION
Any authorized EBR dealer is responsible for providing the
warranty repair work on your motorcycle. If you have any
questions regarding the warranty obligations contact your
selling dealer. For normal service work or warranty work
124
Summary of Contents for 1190 SX
