EBR 1190 SX, Owner'S Manual

Page: 78 / 142

FINE TUNING SUSPENSION
Changes in Load
Changes in the load carried require changes in the preload
settings. Carrying less weight requires decreasing the amount
of preload. Increasing the load carried requires adding more
preload. Refer to Table 17 and adjust preload to match the
total weight that will be carried on the motorcycle.
^
WARNING
Do not exceed the motorcycle's Gross Vehicle Weight Rating
(GVWR) or Gross Axle Weight Rating (GAWR). Exceeding
these weight ratings can affect stability and handling, which
could result in death or serious injury.
• GVWR is the sum of the weight of the motorcycle,
accessories, and the maximum weight of the rider, and cargo
that can be safely carried.
• GAWR is the maximum amount of weight that can be
safely carried on each axle.
• The GVWR and GAWR are shown on the information
U. S. plate, located on the frame steering head.
Factory Suspension Settings are a balance of handling, ride,
and stability. Suspension can be changed to accommodate
rider preferences for ride quality, handling, road conditions
and load changes.
NOTES
Do not adjust the following settings beyond those which are
listed below.
^
WARNING
Adjust suspension to the recommendation if possible, but
never force adjusters beyond the mechanical stops. Do not
operate motorcycle with loose, worn or damaged steering or
suspension systems. Contact an EBR dealer for repairs.
Loose, worn or damaged steering or suspension components
can adversely affect stability and handling, which could result
in death or serious injury.
Ride Quality Enhancement
1. The stock settings are designed to offer sufficient
chassis control, but some may choose to enhance ride
comfort over rougher road conditions or for long rides.
Reducing the compression damping will allow the suspension
to move more freely reducing road input to the rider. Adjust
78