iii
DANGER:
Loudspeakers should be suspended overhead only by persons with a knowl-
edge of the proper hardware and rigging techniques. When stacking or pole-mounting
loudspeakers, be sure they are stabilized and secured from falling over or being accidentally
pushed over. Failure to follow these precautions may result in damage to the equipment,
personal injury, or death.
EAW strongly recommends the following rigging system practices:
1 . D O C U M E N TAT I O N :
Thoroughly document the rigging system design with
drawings and detailed parts lists.
2 . PROFESSIONAL
REVIEW:
Have a licensed structural engineer, registered
architect or other qualified professional review and officially approve the
rigging design before its implementation.
3 . P R O F E S S I O N A L
I N S TA L L AT I O N :
Have the rigging system installed and
inspected by a qualified professional rigger.
Section 2
Unpacking
2.1 Shipping
Damage
You should have already visually inspected the outside of the shipping carton and noted
any damage on the shipping bill you signed. After unpacking, if you find concealed damage
to the loudspeaker, save the packing materials for the carrier’s inspection, notify the carrier
immediately and file a shipping damage claim.
Although EAW will help in any way possible,
it is always the responsibility of the receiving
party to file any shipping damage claim.
The carrier will help prepare and file this claim.
2.2
Returning Products to EAW
If this loudspeaker must be returned to EAW, contact EAW for a
Return Authorization
. Use
the original shipping carton and packing materials. If the shipping carton is damaged,
contact EAW for a new carton. EAW will not be responsible for damage caused by
inadequate packing.
