17
6.3.4.2
Removing the High Frequency Horn Assembly:
This assembly is heavy, made up of a horn, a metal bracket, 2 metal standoffs, and a
driver with two electrical leads. The leads must be disconnected carefully.
•
Remove the phillips head screw and lock washer that attaches the top and bottom
supports to the cabinet.
•
While supporting the assembly, remove the bracket mounting screws with a 3/16
allen wrench. These 4 socket head screws, lock washers and flat washers are indi-
cated by the arrows. Do not discard the mounting hardware.
•
Disconnect the red lead + from the driver’s red pushbutton connector.
•
Disconnect the black lead – from the black pushbutton connector on the back of
the driver.
•
Lift the horn assembly away from the cabinet.
6.3.4.3
Removing the Woofer:
The woofer should rest in the lower half of the cabinet (as shown).
•
Remove the 4 woofer mounting screws with a 3/16 allen head wrench. Do not
discard the mounting hardware.
•
Lift the woofer enough to remove the blue lead + from the red pushbutton
terminal and the orange lead – from the blue pushbutton terminal.
•
Lift the woofer from the cabinet.
HORN ASSEMBLY 251121
TOP HORN SUPPORT 606141 & 606142
BOTTOM HORN SUPPORT
606127 & 606128
2X #10 X 3/4 LG PHILLIPS
HEAD SCREW 102039 &
#10 LOCK WASHER 205007
12" WOOFER 804091
DISCONNECT BLUE
LEAD + FROM RED
PUSHBUTTON
DISCONNECT AND
ORANGE LEAD – FROM
BLUE PUSHBUTTON
4X 1/4-20 SOCKET
HEAD CAP SCREW 102017
USE 3/16 ALLEN WRENCH
