13
•
Remove the 4 screws and washers from the center of the grille with a 5/32 allen
wrench. These attach the front of the internal high frequency horn to the grille.
•
Remove the16 grille mounting screws and washers from the outside edge with
a phillips head screwdriver. During removal, hold the grille and grille foam in place.
This prevents the grille foam from tearing. Do not discard the mounting hardware.
6.3.2.2
Removing the High Frequency Horn Assembly:
Refer to Section 6.3.1.2.
6.3.2.3
Removing the Two Woofers:
Refer to Section 6.3.1.3.
6.3.2.4
Disconnecting the Doghouse:
To access the mid frequency driver/phase plug assembly, disconnect the doghouse.
•
Remove the 22 phillips head screws that attach the doghouse to the cabinet. The 18
side mounting screws (9 per side, indicated by the arrows) are 5/8”long, and the 4
back mounting screws are 1-1/4”long. Do not discard the
mounting hardware.
GRILLE FOAM 712028
GRILLE 702381-0002
EAW
16X GRILLE SCREWS
#8 X 5/8"LG PHILLPS
HEAD BLACK 102102
(ONLY 7 SHOWN)
4X GRILLE WASHERS
1/4 NYLON BLACK 105065
(ONLY 2 SHOWN)
4X HORN MOUNTING
GRILLE SCREWS 1/4-20 X 1
LG BLACK 104023 USE 5/32
ALLEN HEAD WRENCH
(ONLY 2 SHOWN)
ARROWS INDICATE THE 9
DOGHOUSE MOUNTING
SCREWS 10-24 PHILLIPS
HEAD X 5/8 LG 102057
THAT MUST BE REMOVED
FROM EACH SIDE OF THE
CABINET
4X BACK DOGHOUSE
MOUNTING SCREWS
10-24 X 1-1/4 LG
PHILLIPS HEAD
102053
