14
After removing the 22 mounting screws, carefully move the doghouse to access the
phase plug assembly. The internal electrical wires that connect the components are
short in length and must be handled carefully.
•
Remove the yellow lead + from the red pushbutton terminal on the phase plug
assembly.
•
Remove the violet lead – from the black pushbutton terminal on the phase plug
assembly
6.3.2.5
Removing the Phase Plug Assembly:
Refer to Section 6.3.1.5.
6.3.2.6
Disassembling the Phase Plug Assembly:
Refer to Section 6.3.1.6.
6.3.2.7
Reinstallation of KF750P components:
To reinstall any of the components mentioned in this section, reverse the appropriate
disassembly instructions.
6.3.3
KF750P-WP LOUDSPEAKER
PROCEDURE:
6.3.3.1
Accessing the Woofer Chamber:
Remove the grille, grille foam and wire mesh.
•
Remove the 4 central screws from the grille with a 5/32 allen wrench. These attach
the front of the internal high frequency horn to the grille.
•
Remove the16 grille mounting screws and washers from the outside edge with a
phillips head screwdriver. During removal, hold the grille, grille foam and wire
mesh in place. This prevents the grille foam from tearing. Do not discard the
mounting hardware.
KF750 PHASE PLUG
ASSEMBLY 251147
