22
Rigging Multi-Column Arrays (Otto)
The Otto Flybar has a built in “pin and tapered slot” feature, allowing users to create multi-column
arrays with the proper spacing and angle between columns. Before rigging multi-column arrays, verify
your configuration in Resolution.
1.
Begin with two stacks of up to 4 Otto modules, both with Flybars already rigged on top.
Because users will need to move the arrays using the Caster Pallets, they may choose to stack
only one or two modules to reduce the weight.
2.
Align the two columns such that the tabs of one Flybar engage with the slots of the
other Flybar.
3.
Slide the columns relative to each other until the two quick-release Flybar Pins can be engaged
through BOTH Flybars.
4.
Tighten the two cam levers on the sides of the Flybar by spinning the handles until the
mechanism begins to grab and then flipping the cam lever closed, similar to the operation of a
bicycle wheel’s quick-release hub.
5.
Attach chain motors to the Flybars as defined by your Resolution model.
6.
Fly out the first stack of Otto modules.
7.
Proceed as indicated in “Rigging Modules to Flybar” and “Rigging Modules from Modules”
except with multiple columns simultaneously. Take great care when working within the multi-
column array. Tight spacing and many similar and identical rigging grips create the potential for
human error and potential injury.
Flying Distro Racks
Warning: When the Anya Distro Rack Flybar is used for suspension its Working Load Limit (WLL), Total
Vertical Pull, is limited to six (6) Anya Distro Racks. The WLL Design Factor is 10:1.
*It is recommended that users properly attach all cabling prior to suspending Distro Racks
Flybar
The Flybar is to be suspended by user-supplied ¾” shackle(s). The
Flybar is designed to be flown by either a single center point or
bridled to any of the outer two rigging points.
Detaching Distro Rack from Caster Pallet
In order to properly suspend a Distro Rack column, each
Distro Rack must be removed from its Caster Pallet.
1.
Remove the bottom quick release pins, one on either
side.
Summary of Contents for ADAPTive systems
Page 1: ...Accessory Rigging Guide...
