10
Suspension of Anya Flybar
For suspension of a single Anya column, four suspension options are available (See figure below)
A. One point – Array is suspended from center front point.
B. Two points – Array is suspended from two points, one on each side (left and right) of center.
C. Three points – Array is suspended from front & outermost two points, and rear-most
center point.
D. Four points – Array is suspended from outermost front and rear points.
In all situations, it is critical to verify in EAW’s Resolution software that your configuration does not
exceed recommended loads for any aspects of the Anya rigging system. It
is
the responsibility of the
installer/technician to verify the chain motors, connecting members (i.e. slings, spansets, shackles,
etc.) and facility’s rigging structure is certified and capable of meeting the required load of the system.
For arrays larger than a single column, use Resolution to determine the appropriate hang style and
support method for each column (many options are available).
Always refer to EAW Resolution Software before installation to determine load exact load values on
rigging and max limits of any array configuration.
Once assembled, ensure that trim angle of array is plumb and level (0 degrees).
SINGLE ANYA WEIGHT = 285 lb (129.3 kg)
ANYA FLYBAR WEIGHT = 98 lb (44.5 kg)
*The above weights are for a 10:1 Safety Ratio. Consult Resolution for other ratings.
SINGLE COLUMN ANYA ARRAY [10X DESIGN FACTOR]
HANG/PICK POINT QUANTITY
1
2
3
4
SHACKLE REFERENCE
A
B
C
D
SHACKLE SIZE [MIL RR-C-271F]
3/4in (Ø 0.85in PIN)
MAXIMUM ANNA / COLUMN
11
18
18
18
PICK POINT QUANTITY WLL (shown in lbs./kg) 3300 /1497
5425 / 2461
Summary of Contents for ADAPTive systems
Page 1: ...Accessory Rigging Guide...
