6 Operation
6.2 Starting the device
54
MICRO PANEL XV400 5.7"/8.4"
12/2014 MN04802009Z-EN
www.eaton.com
6.2
Starting the device
1
Insert the CF card with the operating system:
1.1
Remove the CF slot cover (A).
1.2
Insert the CF card into CF slot (B).
1.3
Fit the CF slot cover (A).
2
Energize the device.
The device will boot.
CAUTION
Data loss
During a write operation, the CF card may lose data or may be destroyed if it is re-
moved or if there is a power failure.
Always secure CF cards with the CF slot cover.
Avoid write operations to CF cards. Reasons:
-
The number of write cycles possible on CF cards is limited.
-
A power failure during write operations will most likely lead to loss of data.
Only remove the CF card when the device is in a de-energized state.
Before switching off, ensure that no software write operations to the CF card are
in progress («CF ACT» LED must not be lit).
Abb. 45 Service side of the device (CF slot cover fitted)
Do not apply any force (CF cards are protected against reverse insertion).
Abb. 46 Service side of the device (CF slot cover removed)
