background image

5

Abreviations and meanings

ABX1

• Remote Control Device Xanura

One remote control device for operating the 

TV, video, DVD, audio (infrared) and various 

Xanura applications. (Radio frequencies). 

RIX

• RF-Interface Xanura

Receives RF signals from the remote control 

device and transposes these into Xanura 

commands that are then sent via the mains.  

AIX

• On/Off Interface Xanura

Switch interface for mounting behind 

switches or pulse switches. For sending 

on/off commands.

SAX1

• Switch/Actuator Xanura

Mounted behind wall sockets or in fitment/

appliance housings. For remote control switching 

of lighting and various electrical appliances.

SAIX

• Switch Actuator/Interface Xanura

Mounted behind switches or pulse switches. 

For local switching of the actuator and for sending

Xanura commands to other Xanura components 

for switching or control. 

DIX2

• Dimmer Interface Xanura

Mounted behind toggle pulse switch. For local 

or remote control dimming/switching of lighting points

provided with dimming activators.

GIX

• Group Interface Xanura

Mounted behind switches or pulse switches. 

For control of various activators by means of 

group commands.

AIX12

• On/Off Interface Xanura

Mounted behind, for example, any 230 V 

movement detector. Sends on/off commands 

when movement is detected.  

DAX10

• Dimmer actuator Xanura

Mounted behind wall sockets in central junction 

boxes or lighting fitments. For remote control 

dimming or switching of lighting points.

DAIX10

• Dimmer actuator/Dimmer interface Xanura

Mounted behind (toggle) pulse switch. For local 

and remote control dimming or switching of 

lighting points.

CIX 

• Computer interface Xanura

With this facility, switch actuators or group switch 

actuators can be automatically operated by an 

electronic clock or calendar.

2

1

3

1

2

3

The CIX independently activates
the preselected scenarios
based on time, date, setting
and status of the modules.

Table lamp (2) can be
operated by a wall switch 
or remote control device.

THe CIX automatically swithes on lamp 3 and
table lamp 2 and 4 when it starts to get dark
outside.

DAIX10

SAX1

SAIX

CIX

Central junction 

box A.

18

19

13

11

11

14

14

16

AIX

SAX1

12

DAX10

SAIX

GIX

15

DIX2

12

DAIX10

AIX12

CIX

Schematic summary 

Summary of Contents for Xanura






























Reviews: