19
X70 PLUG-IN MOTOR REPAIR MANUAL
E-MOPI-RR009-E—March 2019 www.eaton.com
•
Install dowel pins and gasket onto the motor housing.
•
Lightly coat the back plate side of the valve plate with
petroleum jelly for retention during assembly. Install the
valve plate over the small slot on the outside of the valve
plate with the dowel pin in the back plate.
Locating Pin
•
Install end cover assembly onto housing assembly. Make
sure ports are positioned correctly, valve plate and gasket
stay in place. Tight four cap screws.
•
Refer start-up procedure before starting the motor.