17
X70 PLUG-IN MOTOR REPAIR MANUAL
E-MOPI-RR009-E—March 2019 www.eaton.com
Reassembly
•
All parts should be cleaned and critical moving parts
lubricated before reassembly.
•
Refer to Appendix A for reassembly of rotating
kit assembly.
•
Keep the motor housing on motor mounting fixture. And
install shaft subassembly from the front of the housing.
•
Install the new shaft seal in to the adapter with the help
of arbor press.
otee:
N
The diameter of the press tool should not be less
than that of shaft seal outer diameter.
•
Install shaft seal adapter subassembly with the help
of arbor press. Change the O-ring of shaft seal adapter
subassembly.
otee:
N
Inspect the O-ring for any cuts after pressing
into housing.
•
Open the spiral retaining ring & insert one tip in housing
groove & simultaneously push and rotate it inside the
housing groove.