15
X70 PLUG-IN MOTOR REPAIR MANUAL
E-MOPI-RR009-E—March 2019 www.eaton.com
Disassembly – End cover subassembly
•
Remove plug (8) and sleeve (7) from both the side.
•
Remove spring (6) and poppet (5) from end cover.
•
Remove sleeve form one side.
•
Remove plug (11) from the bottom of end cover.
otee:
N
Spring (10) & poppet (9) may fall down.
•
Removal of needle bearing (2) and dowel pin (3) is not
required.
Inspection
•
Inspect the shuttle, poppet and spring for cut, wear and
scoring. Replace it if found damages.
Reassembly – End cover subassembly
•
Install shuttle (4) from one side and hold it from other
side, install poppet (5) spring (6) & sleeve (7) and tight
the plug.
•
Install poppet (5) spring (6) & sleeve (7) from other side
and tight the plug.
•
Install poppet (9) & spring (10) form bottom and tight the
plug.