11
X70 PLUG-IN MOTOR REPAIR MANUAL
E-MOPI-RR009-E—March 2019 www.eaton.com
9. Remove the motor housing from motor mounting fixture,
rotate it 180° and keep it on fixture.
otee:
N
Note:- Cradle bearing may stick to the housing. Use
caution while rotating it. Cradle bearing may fall off.
10. Use flat tip screw driver to remove internal
retaining ring.
11. Use M4 bolt to screw it to the holes provided on the
shaft seal adapter and pull the adapter assembly out of
housing.
12. Pull the shaft subassembly out of motor housing.