5
Eaton Vickers
Solenoid Operated Directional Valves
Product Catalog V-VLDI-MC011-E September 2008
Model Code
DG4V—3(S)—** *(L)—(**)—(V)M—(S*)—* ** * D* (L)—* *—6*—(EN***)—(P**—A**—B**—T**)
1
Model Series
D –
Directional valve
G –
Subplate/manifold mounted
4 –
Solenoid operated
V –
Pressure rating 350 bar
(5075 psi) on P, A & B ports
2
Standard or high
performance
3
– High performance specifi
-
cation: up to 80 l/min (21
USgpm) at 350 bar (5075 psi)
3S
– Standard performance
specification: up to 40
l/min (10.5 USgpm) at
350 bar (5075 psi)
3
Spool type
See “Functional symbols” section.
4
Spool Spring
Arrangement
A
– Spring offset, end-to-end
AL
– Same as “A” but left
hand build
B
– Spring offset, end to center
BL
– Same as “B” but left
hand build
C
– Spring centered
F
– Spring offset, shift to center
FL
– Same as “F” but left
hand build
N
– No-spring detented
5
Manual override option
No symbol
– Plain override(s)
in solenoid
end(s) only
s
H
– Water-resistant override(s)
on solenoid end(s)
s
H2
– Water-resistant override
both ends of solenoid.
P2
– Plain override both ends
of single solenoid.
Y
l
– Latching manual over-
ride on solenoid ends
(includes “H” feature
seal)
s
Z
– No overrides at either end
s
No override in non-solenoid
end of single solenoid valves
l
Not available on DG4V-3S,
AC models
6
Solenoid energization
identity
V
– Solenoid “A” is at port “A”
end and/ or solenoid “B” is
at port “B” end, indepen-
dent of spool type
Omit for U.S. ANSI B93.9
standard requiring solenoid
“A’’ energization to connect
P to A and/or solenoid “B’’ to
connect P to B, independent
of solenoid location.
NOTE:
Type “8” spool valves
conform to both U.S. and
European solenoid designa
-
tions. When ordering an “8”
spool, designate a “V” in the
model code.
7
Flag symbol
M
– Electrical options and
features
8
Spool indicator switch
Available on high performance
models, DG4V-3, only. Omit
when not required.
DG4V-3-*A(L)-(V)M models
with type U (ISO4400) electri-
cal connector to solenoid;
spool type 0, 2 or 22 only:
S6
– LVDT type DC switch with
Pg7 connector plug.
DG4V-3-*A(L)-(Z)-(V)M-S*-FPA5W
valves with mechanical type
AC (~) switch, wired to 5-pin
receptacle:
S3
– Switch, wired normally open
S4
– Switch, wired normally
closed
DG4V-3-*A(L)-(Z)-(V)M-S5-F(T)
W/J valves with mechanical
type AC (~) switch:
S5
– Switch, free leads
9
Coil type
U
– ISO 4400 (DIN 43650)
mounting
u
U1
– Connector fitted
U6
– Connector fitted w/lights
U11
– Connector fitted
w/rectifier & lights**
U12
– Connector fitted
w/rectifier**
F
– 1/2" NPT thread
conduit box
KU
– Top exit flying leads*
SP1
– Single 6,3 mm spade*
u
SP2
– Dual 6,3 mm spade*
u
X1
– Flame resistant sole-
noids TP EEx-d-11B-T4
X2
– Hazardous location
solenoids to meet
UL & CSA approval
X3
– Special protection
solenoids to BASEEFA
standar SFA009:1972,
protection class EX-S-11-T4
u
Female connector to be
supplied by customer
* DC service only
** AC service only
10
Electrical connector
T
– Wired terminal block
PA
– Instaplug male
receptacle only
PB
– Instaplug male &
female receptacle
PA3
– Three pin connector
PA5
– Five pin connector
7
6
5
4
3
2
1
8
9
12
10
13
11
14
16
15
18
17
11
Housing (F type coils only)
W
– 1/2" NPT thread
wiring housing
J
– 20 mm thread wiring
housing
12
Surge suppressor/
damper
D1
– Encapsulated diode
(Industrial applications)
D2
– Encapsulated diode
(Mobile applications)
D7
– Transzorb type
(F,KU,U,SP1,SP2 only)
13
Solenoid indicator lights
Not available on PA, KU, U,
SP1& SP2
14
Coil rating
Full power coils, see
“Operating Data”.
A
– 110V AC 50Hz
B
◊
– 110V AC 50Hz/120V AC 60 Hz
C
– 220V AC 50 Hz
D
◊
– 220V AC 50 Hz/240V AC 60 Hz
G
– 12V DC
H
– 24V DC
For DG4V-3 only (not usable
with DG4V-3S):
Low power coils, see “Operating
Data”. (Not available with “N” –
No-spring detented models)
BL
– 110V 50 Hz/120V 60 Hz
DL
– 220V AC 50 Hz/240V AC 60 Hz
GL
– 12V DC
HL
– 24V DC
◊
For 60 Hz or dual frequency
Contact your Eaton representa-
tive for additional coil voltage
options.
