Eaton VCPW-HD Instruction Booklet Download

Page: 32 / 32

Eaton

Electrical Sector

1000 Eaton Boulevard

Cleveland, OH 44122

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IB131024EN / TBG1371

November 2017

Eaton is a registered trademark.

All other trademarks are property of their

respective owners.

Instruction Booklet

IB131024EN

Effective November 2017

38 kV Type VCPW-HD Simple Electrical

Ground & Test Device (SEG&TD) lower

terminal instruction booklet

The instructions for installation, testing, maintenance, or repair

herein are provided for the use of the product in general commercial

applications and may not be appropriate for use in nuclear applica-

tions. Additional instructions may be available upon specific request

to replace, amend, or supplement these instructions to qualify them

for use with the product in safety-related applications in a nuclear

facility.
The information, recommendations, descriptions, and safety nota-

tions in this document are based on Eaton’s experience and judg-

ment with respect to Retrofitting of Power Breakers. This instruction-

al literature is published solely for information purposes and should

not be considered all-inclusive. If further information is required, you

should consult an authorized Eaton sales representative.
The sale of the product shown in this literature is subject to the

terms and conditions outlined in appropriate Eaton selling policies

or other contractual agreement between the parties. This literature

is not intended to and does not enlarge or add to any such contract.

The sole source governing the rights and remedies of any purchaser

of this equipment is the contract between the purchaser and Eaton.

NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE

OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING

THE INFORMATION, RECOMMENDATIONS, AND DESCRIPTIONS

CONTAINED HEREIN.

In no event will Eaton be responsible to the

purchaser or user in contract, in tort (including negligence), strict

liability or otherwise for any special, indirect, incidental or conse-

quential damage or loss whatsoever, including but not limited to

damage or loss of use of equipment, plant or power system, cost

of capital, loss of power, additional expenses in the use of existing

power facilities, or claims against the purchaser or user by its cus-

tomers resulting from the use of the information, recommendations

and description contained herein.

Summary of Contents for VCPW-HD

































Search results

Summary of Contents for VCPW-HD

Reviews:

Related manuals for VCPW-HD

Brands by name

Popular brands

Eaton VCPW-HD, Instruction Booklet

Search results

Summary of Contents for VCPW-HD

Reviews:

Related manuals for VCPW-HD

Brands by name

Popular brands