Eaton Remote Monitoring Device (RMD) Installation and Operation Manual P-164000516—Rev 02
9
Fault Condition Screen
– When a fault condition occurs the status indicators and information area will be
displayed as shown in
Figure 10
and indicates the UPS has an active alarm and requires immediate attention. If
this occurs, check the state of the UPS and if necessary contact service as the UPS may not be able to provide
backup power.
All alarms are accompanied by an audible signal. To silence the audible signal, press the power button
momentarily (see ). The Alarm status indicator may be illuminated along with other indicators.
Figure 10. Fault Condition Screen
Operation
