VOLTAGE SELECTION
Eaton 9PXTFMR5, 9PXPPDM2, 9PXTFMR11, and 9PXPPDM1 User's Guide
S
P-164000200 Rev 4
29
Procedure
To change the 9PXPPDM1 or 9PXPPDM2 voltage switch position:
1.
On the 9PXPPDM1 or 9PXPPDM2 front cover, unsnap and remove
the square center cover.
2.
Remove and retain the two left-side Phillips-head screws that
secure the front cover (see Figure 17).
Remove Screws
208V
24
0V
NORMAL BYPASS
Figure 17. Remove the Front Cover Screws
3.
Open the front cover from the left side (see Figure 18).
208V
2
4
0
V
UPS
B
Y
PA
S
S
Figure 18. Open the Front Cover
4.
Turn the switch to the selected voltage.
5.
Close the front cover and secure it with the two Phillips-head
screws.
6.
Replace the square center cover.
7.
For startup with the UPS, go to Chapter 4 “Startup” on page 35.
Summary of Contents for PowerPass 9PXPPDM1
Page 10: ...INTRODUCTION Eaton 9PXTFMR5 9PXPPDM2 9PXTFMR11 and 9PXPPDM1 User s Guide S P 164000200 Rev 4 4...
Page 12: ...SAFETY Eaton 9PXTFMR5 9PXPPDM2 9PXTFMR11 and 9PXPPDM1 User s Guide S P 164000200 Rev 4 6...
Page 50: ...STARTUP Eaton 9PXTFMR5 9PXPPDM2 9PXTFMR11 and 9PXPPDM1 User s Guide S P 164000200 Rev 4 44...
