Class A EMC Statements
FCC Part 15
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Requesting a Declaration of Conformity
Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:
l
Harmonized Standards: EN 62040-2:2006
EN 55022:2006 Class A, EN 55024:1998+A1:2001:A2:2003
l
EU Directive: 2004/108/EC, Council Directive relating to electromagnetic compatibility
The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC
Declaration of Conformity, contact:
Eaton Power Quality Oy
Koskelontie 13
FIN-02920 Espoo
Finland
Phone: +358-9-452 661
Fax: +358-9-452 665 68
Eaton, Power Xpert, and X-Slot are registered trademarks and PowerChain Management is a trademark of
Eaton Corporation or its subsidiaries and affiliates. Excel, Internet Explorer, Microsoft, and Windows are
registered trademarks of Microsoft Corporation in the United States and other counties. Freescale is a
trademark of Freescale Semiconductor, Inc. Google Chrome is a trademark of Google Inc. IBM is a registered
trademark of International Business Machines Corporation. Linux is a registered trademark of Linus Torvalds.
Micrel is a registered trademark of Micrel, Inc. Modbus is a registered trademark of Schneider Automation.
Mozilla and Firefox are registered trademarks of the Mozilla Foundation. NetWare is a registered trademark of
Novell, Inc. OpenView is a trademark of Hewlett-Packard Company. Phillips is a registered trademark of
Phillips Screw Company. All other trademarks are property of their respective companies.
©Copyright 2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
