Configuring the Card
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1
35
10. If the humidity alarm remains active for a specified amount of time, you can signal the NetWatch clients to
shut down. To specify the amount of time, set the seconds for the humidity alarm in the
OS Shutdown
Delay
. Enter 1 to 600 seconds (1 second to 10 minutes) to enable the shutdown. The default is 0, which
means the NetWatch clients will not be shut down.
11. Click
Apply
and then
OK
to save the settings.
Saving and Restoring Configuration Settings
You can create a backup of the PXGX UPS Card settings and restore them at a later date.
Creating a Backup
To create a backup:
1.
Select
Save and Restore
from the Configuration menu.
2.
To save the PXGX UPS Card settings and preferences, click
Save gateway configuration
.
The card exports an XML file containing the PXGX UPS Card configuration settings.
3.
Click
Save
and enter a file name and location to save the XML file.
4.
If a blank browser window remains open, close it.
Restoring a Backup
Note:
Restoring configuration settings overrides all changes made to the configuration settings since the
backup file was created.
To restore the configuration settings from a backup file:
1.
Select
Save and Restore
from the Configuration menu.
2.
Click
Browse
to select the file name and then click
Open
.
3.
When prompted, confirm that you want to override the configuration settings with the backup file. Click
OK
or
Cancel
.
4.
Update the Web page if the Device Data does not automatically display after the backup is complete.