Getting Started
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1
18
IPv6 Address Assignments
There are four sets of IPv6 addresses that can be assigned to the card:
l
Gateway.
Manually assigned IPv6 Gateway address.
l
Link-Local Address.
The Link-Local Address is a permanent address assigned to the card.
l
Automatic Address.
This address only displays if the card is connected to a network router that supports
stateless address autoconfiguration.
l
Static Address.
Manually assigned fixed IPv6 address.
Note:
Only the Gateway and Static addresses are user-configurable. The Link-Local and Automatic
addresses are automatically populated.
Note:
Dynamic Host Configuration Protocol for IPv6 (DHCPv6) is not supported.
To manually enter a fixed IP address for the card:
1.
Open your Web browser and enter:
http://192.168.200.101/
.
You are prompted to log on.
2.
Log on as administrator. The user name and default password is
admin
. The PXGX UPS Card Web page
displays.
3.
Select
Network
from the Configuration menu. The Network page displays (see Figure 24 on page 16).
4.
Enter the Static and Gateway addresses in the IPv6 section.
5.
Click
Apply
.
6.
Click
OK
to confirm.
