Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
9
•
For firmware versions older than 2.6.5 the default username and password is “admin”.
The PXGMS card Web page displays.
NOTE
If the system is unresponsive and you cannot make any selections, the browser may be
running in compatibility mode. To disable compatibility mode, go to the
Enable Browser Compatibility Mode
section.
3.
Select
Network
from the
Configuration
menu. The
Network
page displays (see
).
Figure 9. PXGMS Card Network Page
4.
Under IPv4, the
Automatic Configuration: DHCP Enabled
setting checkbox should be enabled by
default. Make sure the checkbox is checked (enabled) before continuing.
5.
Scroll down to
Name Service
and expand the selection to update the next two DHCP settings (see
):
•
Check the checkbox (enable) for
Use DHCP (when enabled) to get name services
.
•
Check the checkbox (enable) for
Use DHCP (when enabled) to get domain name
.
6.
Click
Apply
.
