12
Eaton PXGMS Card Quick Start Instructions P-164000208—Rev 06
Figure 11. Disable DHCP Setting
4.
Uncheck the
DHCP Enabled
checkbox to disable DHCP and allow you to manually configure the IP
address (see
).
5.
Refer to the
section. Enter the IP address, Netmask, and Gateway addresses in the
IPv4 > Manual Configuration
section.
6.
Click
Apply
, then click
OK
to confirm.
7.
Optional:
If you are using a host name, or host names, for controlling access to the card:
•
Type the server IP address in the
Name Server
box. (Up to three IP addresses can be entered.)
•
Click
Apply
. Click
OK
to confirm.
8.
Open a browser and enter the fixed (static) IP address.
9.
Log on as administrator:
•
For firmware 2.6.5 and higher the username is “admin” and the default password is the card's MAC
address (case sensitive with no colons).
For example: Card's MAC address: 00:E0:D8:FF:C0:C4
